Pressure window wash logo windows#

If there isn’t a rinse setting, you’ll have to empty the soapy water from the tank and refill the pressure washer with clean water. You can do this with your regular garden water hose or use the rinse setting on the pressure washer. Step 8: Rinse with Clear Waterįinally, rinse the soapy residue off the window. For this reason, it’s also a good idea to only soap up a window or two at a time.

Pressure window wash logo windows#

Ideally, try to clean your windows early in the morning on cooler days to avoid soap drying quickly on the windows, which can leave spots and streaks. , Move lightly and quickly over wooden window frames or caulking so as not to damage them. Step 7: Spray on SoapĪpply the cleaning solution to the window. You also want to stand at about a 30-degree angle to the window-in other words, don’t want to direct the pressure washer straight onto the window. To minimize the force of the sprayer, make sure to stay 3 to 5 feet away from the window at all times. The same rule applies to each individual window: Start at the top of the window frame and move down to the windowsill. Instead, add an extension wand designed for a pressure washer in order to access the upper floors safely. Because the area will get slippery when wet and pressure washers can cause a kickback, it’s unsafe to use one while standing on a ladder. That way, you can rinse away any streaks of dirty water that drop below. You want to clean the windows on your highest story first and work your way down to each level. Next, select the lowest pressure setting-around 1300 to 1700 PSI-to avoid causing damage. So it’s crucial to pick the widest spray pattern using a 40-degree nozzle (white) or a 65-degree nozzle (black). When using a pressure washer, you can run the risk of cracking your windows or loosening window putty. Step 4: Choose the Safest Nozzle and Setting For a nontoxic solution that won’t harm the lawn or any plants, try a mixture of water and a few drops of dishwashing liquid (check that this is compatible with the manufacturer’s instructions first). Step 3: Add Cleaning SolutionĪlways follow the pressure washer instructions and fill the tank with the appropriate water levels and a cleaning agent. On the other hand, if your windows are fairly new and still under warranty, you may want to confirm first if pressure washing them will void the warranty. If the frames look old or worn down, particularly if they’re made of wood, it may be best to avoid the risk of pressure washing them. If there are any cracks in the window frame, seal those with window caulking before you begin. If you’re concerned about water seeping through the windows, use tape on the part of the window where the sill and the window meet. Step 2: Check All Windowsīefore washing any windows, go through the entire house and make sure all windows are closed shut. If something isn’t movable and you’re concerned about it getting damaged, cover it with a tarp.

Also, move outdoor furniture, decorations, or potted plants out of the area where you’ll be working. Remove screens, if necessary (you can rinse these separately using the garden hose). Cover up any outdoor electrical outlets with tape if they are exposed. Start by putting on eye protection, gloves, and closed-toe shoes. Here is the process for cleaning your windows using a pressure washer. Since you’ll be using a strong stream of pressurized water to handle most of the cleaning, it’s important you take precautions to avoid potential injury and damage to your property. This guide will show you the best way to pressure wash windows and give you tips to remember in case you’d rather call in professionals to handle the job. You’re probably wondering, “Is it safe to pressure wash windows?” The answer is yes-so long as you do it correctly.

Thankfully, there’s a much faster way that only requires much less effort: pressure washing your windows. However, this could be time-consuming and straining on the body. But when it comes to the exterior side, how are you expected to navigate around the bushes in your yard or reach second (or even third-) story windows? One solution is to tackle them one by one using an extension pole equipped with a squeegee. Of course, washing windows from the inside is pretty straightforward.